Wanted: Collins equipment...
 
  • 618U- series HF transceivers, &
  • 618K- series HF/VHF transceivers, &
  • 618J- series VHF transceivers, &
     any commercial racks, parts, manuals, or other documentation.

  •  
  • 51H- series HF receivers, & any commercial racks, parts, manuals, or other documentation.

  •  
  • 95S-1 or 95S-1A or 95V-1 receivers.
  • Collins KC-1 control head for the 95S-1A receiver (it looks like a Rockwell/Collins mousepad with 4 knobs).

  •  
  • PRC-515 or 719D-2 or 719D-15 HF radio sets.
  • PRM-501 & PRM-502 test sets for the PRC-515 manpack radio set.
  • 969J-2 & 969J-3 test sets for the 719D-2 manpack radio set.
  • 963A-1 backpack harness & frame for a 719D-2 or PRC-515 manpack radio.
  • 719D-2 or PRC-515 scrapper radios or radio parts or radio test sets or extender cables or extender chassis.

  •  
  • TRC-169 radio or VRC-80 radio or VRC-81 radio or 718U-1 radio or 718U-1A radio or 718U-2 radio or 718U-2A radio or 718U-2B radio or 718U-3 radio or 718U-4 radio or 718U-5 radio or 718U-6 radio or 718U-7 radio or 718U-8 radio or 718U-9 radio or 671U-1 receiver/exciter or 671U-1A receiver/exciter or 548S-1 PA/coupler or 490B-4 antenna coupler or 490B-6 antenna coupler or 981G-1 load coil or 990Y-1 mount or 990X-2 mount or 540D-1 cable.

  •  
  • 790-0089-001 Card Extender Kit.

  •  
  • 548S-3 Power Amplifier/Antenna Coupler or 718U-5 or ARC-174(V) or 718U-3 HF radio sets.

  •  
  • 990C-1 rack & shockmount unit for 671U-4 & 548S-3.

  •  
  • VC-120 or MP-150 or 719D-15 or GRC-220 HF radio sets.
  • 549C-1 HF power amplifier & antenna couplers and 998W-1 power conditioners.

  •  
  • URC-113 HF radio sets, and AM-7148/GRC-206 HF RF Power Amplifier/Antenna Couplers, and PRC-105 HF manpack radio sets.

  •  
  • DY-78/URR dynamotor power supply module for the R-390/URR or the R-391/URR.

  •  
  • PP-3702/ARC-102 or 390J-2 or 390J-2B rack & shockmount for the 618T-3.

  •  
  • ARM-41 module test set for the ARC-58, or any parts for the ARM-41.
  • 476D-1 distortion analyzer/monitor & 478R-1 spectrum analyzer, & manuals for both.
  • 980H-3 antenna coupler test set, including the 878L-1, 878L-2, & 878L-3.
  • MX-2035/ARC-58 Keyer Group Adapter.

  •  
  • 651S-1 Extender card & cable kit (various Collins P/Ns).
  • 651S-1 A3 ISB Card, Collins P/N 778-2952-001.
  • 651S-1 A9 RS-232 Interface Card, Collins P/N 608-9429-001.
  • 651S-1 A11 Synth Reference Card, Collins P/N 608-9442-001.

  •  
  • Catalogs pertaining to Collins communications gear.
  • Manuals for the TRC-169 or 718U-1 or 718U-1A or 671U-1 or 671U-1A or 548S-1 radio sets or receiver/exciters or power amplifiers.
  • Manuals for the URM-124 module test set.
  • Manuals for the 980H-1, 878L-15, 878L-16, 878L-17 antenna coupler test sets.
  • Manuals for the 980H-3, 878L-1, 878L-2, 878L-3 antenna coupler test sets.
  • Manuals for the 671U-4A HF receiver/exciter & 548S-3 HF power amplifier/antenna coupler..

  •  
  • Large caliber radios of 'Cold War' vintage, like: the 18Z-3 & 18Z-4, 718U-1 & 718U -9, ARC-58 & ARC-80, TRC-75 & TRC-89 & TRC-90 & TRC-91 & TRC-115 & TRC-136, TSC-23 & TSC-38 & TSC-60(V) & TSC-61, URC-75, USC-27, ANNA-1, Aeronautical Communications Company's Atom StarPack,   what have you...
  •  Dave Ross     N7EPI

      Wanted:  Miscellaneous equipment...
     

  • 'Cold War' vintage navigation & optical equipment, like Kollsmann Astrotrackers, INSs, stabilized platforms, bombsights, rangefinders, night vision gear, thermal imagers, you name it...

  •  
  • Hughes Aircraft HC-190 or HC-191 or HC-192 HF manpack radio sets, or any modern HF radios made by the Huge Aircrash Company.

  •  
  • PRC-54 HF/VHF manpack radio set.

  •  
  • Whip antenna & manuals for the Telefunken E6862 manpack receiver.

  •  
  • Any USQ-48 parts, cables, manuals, history, or other documentation.

  •  
  • MX-11620 or MX-11620A tubes for a PVS-4 or a TVS-5.

  •  
  • Any manuals for the Sylvania PRC-82 & PRC-83 & PRC-84 & PRC-85 & PRC-86 radio sets.
  • Any manuals for the PCC-1 radio set & for the TH-81 & TH-85 multiplexers.
  • Any manuals for the TGC-29 MITE ASR teletype set (Air Force TO 31W4-2TGC29-2, 31W4-2TGC29-12, 31W4-2TGC29-24, MIL-T-28957A, etc.).
  • Complete manual for the R-1051C receiver.

  •  
  • Any GRC-215 manpack transceiver radios, parts, test sets, & any manuals or documentation.

  •  
  • Any PRC-16 parts, including an RT-70/GRC receiver/transmitter, a CY-590/GRC battery Box, a CX-1209/U cable, an MT-652/GR antenna base, & two MT-673/U mounts.

  •  
  • RAT series "Command Set" equipment, or any parts, manuals or other documentation.
  • RAV series "Command Set" equipment, or any parts, manuals or other documentation.
  • T.O. 12R2-4-1-42 USAF Technical Order for ARC Type 12 R-22 540-1600 KCs receiver.
  • ARC Type W-10 or ARC Type A7660 assembly tool for "Command Set" spline cables.
  • "Command Set" spline cable parts, like spline ends, collars, ferrules, core, cable, tags, etc.

  •  
  • Friden SRQ or Friden SRW mechanical desktop calculator.

  •  
  • Mechanical cryptographic equipment of any sort, but particularly:

  • - cryptographic equipment made by Hagelin Cryptos or Crypto AG of Switzerland.
    - BC-543 or BC-621 mechanical cryptographic devices (not Signal Corps numbers).
    - Hagelin Cryptos B-21, B-211, C-35, C-36, C-43, C-48, C-52, CX-52 machines.
    - Hagelin Cryptos "B-Maschine" keyboard accessory for the CX-52.
    - mechanical devices used to encrypt & decrypt on-line teletype signals.
    - Hagelin Cryptos "TeleCrypto" devices, like the TC-55 or the TMX-53 or the CBX-53.
    - Hagelin Cryptos VFSE-57 spread-spectrum radio equipment & audio gear.
    - Hagelin Cryptos CVX-396 voice security equipment, cables, mounts, manuals.
    - SIGABA equipment or parts or manuals or other documentation.
    - KL-7 or KL-47 or KLB-47 equipment or parts or manuals or any documentation.
    - KW-7 permuter blocks, or any KW-7 boards or parts or keys or paperwork or history.

    Dave Ross     N7EPI

      Available for trade or for sale, from the Ross Unobtainium Emporium...
     

    All the items below are available for trade or for sale. I have set a fixed price on only a couple items, please feel free to make me a cash or trade offer on anything below. I am easier to deal with on a trade basis. If any item here carries a military nomenclature, you will likely have to get an Export License from the DOD before exporting it from the U.S.   Sorry, I can't help with Export Licensing.   I'm in southwest Washington state, zip 98643.

  • Heathkit GC-1000-H "Most Accurate Clock" kits, with GCA-1000-01 RS-232 output accessory kits for the clocks.  These are the older style, cover 5, 10, & 15 MHz, & are complete & unassembled in unopened Heathkit cartons.  Have two sets available for trade only.

  •  
  • Antenna Products HT-21B HF antenna. This is the antenna used in a TSC-122 - it's a V-Beam which can be set up in one of three configurations.
    - a sloping dipole with 125' wire elements
    - a V-Beam with 250' wire elements
    - a V-Beam with 500' wire elements
    A fine system indeed, if you've got the real estate... This antenna uses a telescoping 40' fibreglas & carbon composite mast with a balun at the top - one person can easily erect it. The far ends of the wire elements attach to 15' masts - the terminating resistors are inside these two masts.
    This antenna is new & complete per the component list in the manual. (From the documentation I have on the antenna, it spent at least one season at National Science Foundation's Palmer Station in Antarctica. From the condition of the antenna it is clear that it was never erected.)
    Check out the HT-21B antenna specs at the Antenna Products website...

  •  
  • TRC-24 antenna set, it is a pair of Yagis that will fit on a boom mounting on the above AB-952 mast. Well built, each beam has a balun built into the driven element. Everything is included, except the setup needs coax and some sort of splitter/combiner to drive the pair of beams - each balun is fed by a type "C" connector.

  •  
  • Various PRC-47 stuff, including complete radio sets in transit cases, individual radios, Bendix PRC-47s, accessories, antenna adapters, PRC-47 manual sets, electrode kits for the BB-626/U zinc-air battery, MITE teletypes & cables & connectors, CV-2455 modems.
  • Various Collins URG-1 equipment, boxes, modules, shelves, controls, cables, extenders, etc.
  • Collins 618Z-4B RF translators & 789R-1(-012) IF translators. These "B" model 618Z-4 units use the 671U-4A synthesizer cardset, & the -012 version of the 789R-1 has the AFC option & includes all four sideband cards.   With a trivial mod, the standard URG-1 control head will function below 2 MHz. Replace the 2-30 MHz bandpass filter in the 618Z-4B with a 30 MHz lowpass filter & use it with the -012 version of the 789R-1. Enable AFC & feed both USB & LSB audio into separate amplifiers & speakers -  you've got a world-class BCBDX receiver.
  • Various Collins URG-2 equipment, GRR-18 & GRT-17 items, black boxes & slices & modules, OK-145 control heads, extender cables & extender chassis units, complete TSC-60(V)2 manual set, etc.
  • Various Collins 718T 718T-1 parts & manual copies - not a complete radio, just pieces & parts. Includes a pair of 548T-1 units, power supply slices, hamstered backplane/sideboard, various other slices.
  • Collins 490T-3 1KW HF antenna couplers with internal 115VAC 400~ power supply.
  • Various parts for Rockwell-Collins 208U-3A & 208U-10A RF Power Amplifiers, including 4CX5000J tubes, spare black box "slices", extender cables & extender chassis units.
  • Rockwell-Collins 671U-4A units, P/N 787-6934-007 & 787-6934-011. The -011 unit is an RT-1433/ARC-174(V), both units used with a 718U-4A or a 718U-5. Still factory sealed, functional, very good condition.
  • Rockwell-Collins MDM2001 Multimode HF Modem, with manual copy & Rockwell software. Check out the MDM2001 specs & some pix & screenshots here...
  • Rockwell-Collins CRU-85 COMPUTER RECEIVING UNIT, P/N 622-5492-019.
  • Rockwell-Collins CIU-80 COMPUTER INTERFACE UNIT, P/N 42801-061201-00, TSO: C94 DO-160 ENV. CAT. DIANE XXXXXXBBBA. Has Intel D4040, Intel two D4289, many Intel P4002-1, many 2708 EPROMs, Efratom frequency standard is missing.
  • Complete manual sets for the TRC-75 Radio Set & the TSC-15 Communications Central radio shelter, including books for the CV-976 Voice Mux & the TGA-1 Teletype Mux.
  • Troubleshooting & repair expertise on the TRC-75 & TSC-15 radios, spare parts & rebuilt units available for trade or purchase at confiscatory prices.
  • Complete original Air Force T.O. manual sets for the 208U-3A, including books for the 652H-13 & 309F-1 & 915X-1 & 333H-2 & 915V-2 & 915V-1 & the 975K-4 plug-in test set.
  • Complete original Air Force T.O. manual sets for the TSC-60(V)1 & TSC-60(V)2 & TSC-60(V)3 Communications Centrals, including manuals for the 208U-3A & 208U-10A & OK-145 & UCC-3 & URG-2 receiver & shelf & URG-2 exciter & shelf & 1KW PA & shelf & the Stelma OW-43/TSC-60(V) line interface unit & complete wiring data for the TSC-60(V)1 & the TSC-60(V)2 & the TSC-60(V)3 shelters. This manual package also includes a book covering the OE-85/TSC-60(V) & the OE-86/TSC-60(V)3 fixed log periodic antennas (Rockwell/Collins P/N 637P-1A & 637P-1), and the Rockwell/Collins 637X-1 transmit Orthogonal antenna and related 490X-1 antenna coupler and 309H-1 antenna coupler controller.
  • Various Collins equipment catalogs, including Broadcast Equipment & C-System Equipment Univac & IBM books.

  •  
  • Rockwell-Collins 95V-1 Direct Conversion Receiver, working, comes with 95S-1 software for Windows for control via an RS-232 port. Receiver covers 5 kHz to 2000 MHz in 1 Hz steps, twin DSP demodulators for AM, FM, USB, LSB, ISB, CW, I/Q. Intended for use in a VME cardcage but uses only +5V & +12V from the backplane so is easy to power on a standalone basis. The 95S-1 software gives the 95V-1 basic functionality and the setup works fine using a USB/RS-232 dongle rather than a true RS-232 port.   Receiver pic & 95S-1 software screenshot

  •  
  • R-1490/GRR-17 HF receiver, last real product of the National Company in Melrose, synthesized every 100CPS from 2-30, internal 120VAC & 28VDC supplies, noise limiter, notch filter, internal TTY demodulator & loop supply. I've just installed a new toothed belt and the radio works like a champ.

  •  
  • Various "Command Set" equipment & manuals, from either the SCR-274-N or the ARC-5 or the ATA/ARA or the RAT series radios.

  •  
  • GRC-9 receiver/transmitter & PP-327B AC power supply & PE-162B gasoline genset & DY-105 28VDC power supply - R/T & ACPS are both used but in very nice condition and both completely functional, PE-162B is just like new & runs fine - probably has less than an hour of run time since I pulled it out of the box, DY-105 is fresh from depot refurb. Comes with power cable & many accessories including correct canvas cover for the radio & genset, with original manuals for all three units.
  • SPERRY Flight Systems -  "COLOR DISPLAY - ARINC 725 ASSY", P/N 4042386-901.
  • United Technologies Norden Systems -  "Vertical Situation Display", Part No. 3561-28000-105, Spec. No. CP409A0138, very nice & complete but for missing processor card - unit is likely from an F-111 variant.
  • MIQ-1(V)3 "Intercommunication Set", 1977 contract, 1982-83 datecodes on internal parts.
  • TA-1042A/U DNVT digital non-secure voice terminals, 5285000-001 5805-01-318-8421 F04606-89-D-0097.
  • 2A3 Bulk Storage Unit, 5805-01-272-0080, 28528 ASSY 1330985G1, possibly used with the SB-3865 TRI-TAC switchboard or TTC-39 or TTC-42. Includes Raymond Model 6310-01 P/N 102990-101, plus socket for possible bubble memory module or possible second Raymond drive.
  • Tape Transport Unit by Sundstrand Data Control, Boeing P/N 232-10940-17, Spec. No. 232-10940, P/N 980-0057-002, 56.2 hours.
  • R-1985A/ARC-176 (10-133145-1) receivers & TD-1178A/AR (10-116089-3) demultiplexers.
  • SG-1139/G "Digital Data Generator" BER test set for TRITAC & ATACS, in transit case.
  • MWM-3 ADA test set for M167A1 20mm "Vulcan" Towed Air Defense Artillery gatling gun, with cables, in transit case.
  • PCC-1 parts, including radio frames, new canvas covers, & junction/terminal blocks.
  • PRC-72 FAC manpack radio set, complete (!) & very clean, with manual copy and seven rebuildable NiCd packs and some PRC-71 vehicular power supply pieces. Maybe trade for Collins ground radio gear.
  • Hughes integrated circuit, new, still in pink foam antistatic pack in plastic box. 74 pin flatpack, numbered 55267 SOCN 655001 82577-3920004 S/N 669.
  • Hughes 928171 RF power transistors, new, studmount, three each. Marked Solitron 63BB114 928171-2B. Similar to 2N5007 & 2N5009 & 63BB111 & 63BB112 & 63BB113 & 63BB115 & 63BB116.

  •  
  • UD-72D( ) Rockwell DS3 Test Set, used, nice.
  • Northern Telecom DS1 & DS3 miscellany, including 1 DMT300F chassis (NT6H32AA) with 2 48V PSUs (NT6H69BA), 8 DS1 TxRx units (NT6H71AA), 7 DS1 LBO units (NT6H63AA), 2 DS3 TxRx units (NT6H62AA), 1 DS3 LBO unit (NT6H66AB), 1 MON/CTRL front panel assembly (NT6H61AB), & 3 DMI-F45 units (NT6H81FB, NT6H81FC, NT6H82FC).

  •  
  • SAI Technology Display Unit. large gas plasma display with polarizing dimmer & touchscreen overlay. Like new condition and appears to be complete. Seems to have some sort of processor inside, like maybe a MicroVAX or maybe a DG MicroNova (can't see under the PC board covers/heatsinks to say for sure). EX402MOD0, PIIN N00019-81-C-3168, DSGN ACT 76301 (McDonnell-Douglas Corp.), P/N 70 p187407-2025, MFR 54779 (Science Applications Intl. Corp., SAI Technology Div.), P/N 7004-5.
    Carroll Touchscreen overlay is a Programmable Function Entry Segment, carries Assy. No. 54779-2448-2 Rev. F, SAIT 12-842037-21.

  •  
  • Various Rolm "Mil-Spec" computer parts, including:
    - PROCESSOR, MODEL 1602, Options 7, 10, 21, 30, 80, with MEMORY CHASSIS-24K, MODEL 2142.
    - PROCESSOR, MODEL 1602B, Options 2, 8F, 16(?), 21, 60, NSN 7035-01-139-4434, with 4 ea. 2011 16Kx16 core memory cards & 1 ea. 5605 card.
    - PRCS. UNIT KEYED CONN. **HCI**, MODEL 1666/D, Options 14(40000), 16, 81, Desc 113665-01/70P187402-1301, Cont N00019-81-C-3168, with 4 ea. 2011 16Kx16 code memory cards & S664 power supply.
    - I/O INTFC UN, KEYED CONN **HCI**, MODEL 2166D, Desc 113653-02/70P187402-1329, Cont N00019-81-C-3168, with 2 ea. 2011 16Kx16 core memory cards & 664 power supply & add-on fan chassis.
    - I/O INTER UN, KEYED CONN **HCI**, MODEL 2166D, Option TCTO 21M-BGM109G-599, Desc 70P187402-1379, with 2 ea. 2011 16Kx16 core memory cards & 664 power supply & add-on fan chassis.       (BGM-109?!? Tomahawk SLCM? Did this 2166 fly? Or was it part of the ship/sub? See FAS.ORG 's page on the BGM-109)
    - I/O INTER UN, KEYED CONN **HCI**, MODEL 2166D, Options 113653-02/70P187402-1355, Cont N00019-81-C-3168, with 2 ea. 2011 16Kx16 core memory cards & S664 power supply & add-on fan chassis.
    - I/O CHASSIS -11 Slot, MODEL 2149, Options 30, S045, 80.
    - CONTROL PANEL, MODEL 1635, Options 10, 81 (two Control Panels available, both with key).

  •  
  • Various Singer-Librascope "UYQ-30" computer parts from the Army's "Maneuver Control System", including computers/displays, printers, power supplies, power distribution boxes, bubble memory units with all modules, etc. Very cool item, the computer units have fold-down keyboards and large plasma displays that are arranged in front of removable trays - you can put a map in the tray and data on the plasma display will overlay the map. The processors power up but then complain that there is no device to boot from. There may be some software in the bubble memory units but I have no cables at all.
  • Various bubble memory pieces, including Q-Bus boards, unused Intel parts, military items, Sharp CE-100B modules.
  • ASH-23 tape drives, & various Raymond tape drives, both commercial & military items.

  •  
  • Klixon 7271-8-5 MS-24510-A-5 MS-24510-5 5 Ampere circuit breakers, quantity 110 each, unused and in original Klixon packaging. These are thermal circuit breakers so they work OK on 28VDC or 110VAC 60~ or 400~. This breaker is in the current Klixon/Sensata catalog.

  •  
  • Various Teletype gear,  including:
    - Like new & completely original & unmolested Model 19 set complete with original manual, & all original spare parts, with nice matching Model 14 set with original manuals.
    Model 28 tape readers & punches.
    - NIB Model 28 Compact RO with gearshift & all original manuals.
    - Teletype Corporation time capsule - unused & unmolested Model 28 RO with original manual set & wiring diagrams & extra gearsets still in the wrap.
    Model 35 ASR & manuals & paper & paper tape.
    - NIB Kleinschmidt TT-537 KSR units in transit cases with extra 60~ governed motors & ribbon reinkers.
    MITE stuff, including KSR & ASR units, gears & motors, manuals & cables, connectors & various other parts.
    - Various military & commercial parts & manuals for Teletype Corp. & Kleinschmidt units.
    - Bulk quantities of page printer paper & paper tape in various widths & colors.
    Wheatstone Morse Code paper tape punch, makes tapes used to key high-speed CW transmitters, has Teletype Corp. labels, in nice dark red wood case, MFPed in Jan 1945, with Navy stamp. Comes with H. O. Boehme reader for Wheatstone tape. Both the reader & punch work fine.   View punch pic #1 & punch pic #2 & punch pic #3 & punch pic #4 & reader pic #1 & reader pic #2 & reader pic #3

  •  
  • Continental AV-1790 V-12 engine, carbureted "7B" model, with manuals & engine stand, fits your M-47, M-48, M-60, M-88, etc.  Looks good & runs well..

  •  
  • MIL-STD diesel-powered centrifugal 2" DED water pump, model MWP-200, built in 1998 by Isometrics, Inc. U.S. Marine Corps acquisition cost of $8855 under contract SP0770-97-C-3695, NSN 4320-01-259-4407. Total weight is 175 lbs, rated 125 GPM @ 50' head. Single cylinder engine with compression release & handcrank starter, packaged in tubular aluminum frame. Engine is air-cooled E673LHK-241A by HATZ (Ruhstorf, Germany) & pump is by Scot Ardox Corp. Beautiful piece of work -  really built to last.   View pic #1 & pic #2 & pic #3 & pic #4 & pic #5   Two pumps available, both unused, both with waterproof fabric covers.

  •  
  • Various optical stuff,  including:
     -USQ-48 gated night vision sight head, mounts on TOW tube.  With STARLITE intensifier tube & gated IR intensifier tube & pulsed laser, has large optics on both visible & IR sights.
     -F4779 gated image intensifier tubes, FSCM 13567 (ITT Night Vision), 5960-01-1344-097AY, F09603-83-C-4027, unused & still in original boxes with factory data sheets. (May be a GLINT intensifier tube from a General Electric ASQ-145 Low-Level Light Television (LLLTV) as used in the AC-130 gunship.)(trade for either a MX-11620 or MX-11620A tube for PVS-4 or TVS-5)
     -SU-93A/TAS Boresight/Collimator 5855-01-029-8730 SM-C-775002, unused in transit case, with NiCd & TM 11-5855-247-24.
     -Oscillating mirror subchassis from TAS-4 & others,  p/n SM-D-807690-(B), used, nice.
     -12271666 Dewar-Detector units, by Hughes or SBIR, used.
     -12271800 "Image Control Unit" for M1 MBT thermal imager, by Hughes, like new.
     -11743121 VVS-1 rangefinder head, unused & still in the wrap since late '80s reconditioning.
     -10559447 ruby rod laser assembly, with 3.08" x .242" ruby rod & 10559659 FX-103C-3 flash tube & clamshell housing.
     -11743800 "Body Assembly" IR viewer/sight, works fine, looks like new.
     -TVS-4 or TVS-4A NOD Night Observation Device, large night vision 'scope. Pic & description here...
     -VSS-1 3KW xenon arc searchlight (IR & visible, spot beam & spread beam, OVERDRIVE), with control head. Originally used on the M60, untested but complete and fresh from rebuild.
     
  • KL-47 & KLB-47 spare parts, NIB, in Teletype Corp. steel storage/transit cases, including motors, printers, keyboards, switch assemblies, & rotorset carrying cases (unfortunately empty).

  •  
  • Old-timey Harley-Davidson parts, including:
    - 2 sets of like-new & original H-D spokes & nipples for 18" WM3 Borrani drop-center rim like on your late '60s Sportster rear. Spokes measure 7.78" from inside of bend to far end, .82" thread length, .162" spoke diameter, .277" nipple diameter.
    Sportster tach cable & drive gear - original H-D parts for late '60s XLCH with Fairbanks-Morse magneto & mechanical tachometer, very nice used condition, gear shows little wear & has no missing teeth & is not chewed up at all. Cable will also fit the Smiths tach below...
    - NIB Smiths chronometric tachometer - 1/2 engine speed and would sure look good on your WR or KR or XR...
    - I'm looking for a pair of 80" ULH cylinders (13 fin) or a pair of sleeves to fit my old cylinders.

  •  
  • 1978 XLCR for sale or trade, 7800 miles. I bought it new in spring of 1979, it last ran some years ago, has cosmetic damage from accident. This bike comes with all pieces necessary to repair that damage, including NOS plexiglas windscreen & NOS rear fender. Also comes with parts like 2F & 1R NOS brake disks, all NOS brake pads, NOS battery, NOS gas valve, set of used drag pipes, aftermarket shocks, other miscellany. Also includes optional dual seat & rear pegs with special axle. With owner's manual & shop manual & imprinted warranty card & all paperwork and receipts since new. This bike has been garaged/stored inside since new, still has a California title and comes with the original California-legal exhaust system. "Restored" XLCRs are pretty common - a bike is new only once. Interesting trades solicited or make cash offer.
  •  Dave Ross    N7EPI    

      back to main page...